|
New energy vehicles in the industry market production and sales break new heights At this stage, according to the car market demand share comparison, there is a desire to buy traditional fuel cars and new energy electric vehicles, however, with the various policies and preferences one after another, the choice of new energy electric car users gradually increased, the love of new energy vehicles rose, in sales and market share data can be reflected. According to the material more. Compared with last month, local production and sales of new energy vehicles completed 755,000 units and 708,000 units respectively, an increase of 1.1 times and 93.9% respectively, with a market share of 27.1%. Among them, the production and sales of pure electric vehicles completed 578,000 and 539,000 units respectively, up 93.8% and 77.2% year-on-year; the production and sales of plug-in hybrid vehicles completed 177,000 and 169,000 units respectively, both up 1.8 times year-on-year; the production and sales of fuel cell vehicles completed 183 and 202 units respectively, up 18.1% and 16.8% year-on-year. At the same time, the material mentioned that the local brand passenger cars sold a total of 1.166 million units, up 40.8% year-on-year, accounting for 50% of the total sales of passenger cars, with the share rising 2.9 percentage points year-on-year. Of course, in all the data, while growing the share. Of course, electric vehicles have been developed for many years, and with more support, the level of industrialization and technical innovation ability and marketability of electric vehicles are rapidly increasing, becoming an excellent electric vehicle market, which can be said to be a great achievement. If you want to know more about related EV Charging cable, please visit or search: https://www.omgevcable.com |
|
Experiments have shown that for specific high-voltage cables, it can often be tailored through the optimization of cross-section, temperature requirements, flexibility and shielding effect. Weight and cost savings can be demonstrated, and oversizing and excessive components can be avoided. Perfectly intricate design and use of high-quality materials, the result will be expensive cable costs. For more information about high voltage cables, please visit or search: https://www.omgevcable.com/Cases/ Optimization of cross-sectional area and temperature class: The selection of cables is mostly based on the indicators of ambient temperature and transmission current. The most important properties in this regard are the "cable cross section" and the "heat resistance class of the material used for the cable". Optimization of flexibility and shielding effect: Cable design appearance and internal core effect, design the most suitable cable for the application: through different conductor specifications may lead to cost and weight increase, larger outer diameter. Of course, considering the highest possible load current and ambient temperature, it will lead to the use of large cross-section cables and high temperature resistant materials, such as organic fluorine or silicon materials. However, manufacturers use cable standards formulated by materials such as PVC or XLPE. Determining the relationship between current and load ambient temperature is very meaningful from a technical and economic point of view. The periodic dynamic current peaks of the real drive should be considered, allowing a reasonable definition of the worst case load current and peak current. To find out more about our range of electric vehicles, you can find more in our high voltage cable leaflet: https://www.omgevcable.com |
|
Make charging convenient for electric vehicle users and promote the development of the new energy industry. Nowadays, with the change of new energy policy, there are many new energy electric vehicles on the road. Cars are the most common means of transportation, because cars can facilitate the daily travel of the general public. High-quality development continues to achieve new results; to promote high-quality development, we must overcome two barriers. One is to solve the pain points and difficult problems in the current operation, so as to achieve stable operation and progress; the other is to actively promote quality, efficiency, and power changes. to enhance future-oriented sustainable development capabilities. For example, a pure electric bus can be fully charged during the peak charging time from 22:00 to 5:00 the next day, and the cruising range can reach about 200 kilometers. times or so. This makes the development of urban public transport convenient and fast, promotes the driving force of the new energy market, and brings convenience to the travel of the masses. At the same time, as a convenient means of transportation for regular family travel, electric vehicles often have a charging time similar to that of electric buses, and can be fully charged at night or during the peak charging period. Of course, with a good connector and a high-quality charging cable, the transmission will be more effective during the charging process. This is an electric vehicle charging cable manufacturer, OMG (OMG) is committed to becoming a world-class provider of new energy vehicle cable solutions. The new achievements of the company's high-quality development have been transformed into the technical confidence, product confidence, brand confidence and value confidence of Dongfeng people. For more EV HV Cable and electric vehicle High-Voltage cable, please visit OMG official website: https://www.omgevcable.com |
