|
Electric vehicles on the road are constantly developing, and electric vehicles relying on charging piles are very important for battery mileage. In particular, the efficiency of DC charging and AC charging of electric vehicles can be simply said to be the difference between fast charging and slow charging. Read more for more. Charging pile: An equipment device that provides charging services for new energy electric vehicles. Its function is similar to that of gas dispensers in gas stations. It is installed in public parking lots, charging stations or private places such as residential quarters and corporate parking lots. The voltage level provides charging services for various types of electric vehicles. Among them, according to the charging method, it can be divided into DC charging piles and AC charging piles. The voltage and current can be adjusted in a large range, which can quickly charge electric vehicles. It is also called "fast charging", and the charging time is about 2 hours. Charging cables are distinguished by DC cables and AC cables. The objects of fast charging and slow charging are public charging and dedicated charging, of course, the charging standards for this will be different. Provide charging services for social vehicles in public places; however, dedicated charging piles are generally built in the unit/enterprise's own parking lot, and the service target is internal personnel. In special cases, there are of course self-use charging piles, which are generally charging services established for users. According to the installation method arranged by the user, it is generally divided into floor-mounted charging piles and wall-mounted charging piles. The common point is that it is installed near the parking space; different from the convenience of installation, the wall-mounted charging pile is more convenient than the floor-mounted charging pile. However, the charging cables used can be divided into DC charging cables and AC charging cables. The floor-standing charging piles are partially selected for DC charging cables. Of course, customized charging cables can be selected according to the user's use. For the installation location, everyone must know the difference between indoor and outdoor. Indoor charging piles have low requirements for safety factor and relatively low cost. Outdoor charging piles are installed in the open air, and the equipment has a high waterproof level. According to the interface of the charging pile, it is generally divided into one charging pile corresponding to only one vehicle; in other cases, there is a multi-charging pile, which can support the charging of multiple electric vehicles, speed up the charging efficiency, and reduce the waiting time of users. To learn more EV charging cable information, Please visit or search: https://www.omgevcable.com |
|
As an automotive interior device to operate effectively, automotive high-voltage cables play an important role in it. The technology of key components such as batteries, motors, and electronic controls is inseparable from high-voltage wiring harnesses. The appearance of high-voltage cable sheath is generally cross-linked polyethylene insulation, XLPE, PVC, etc., but the structure of high-voltage cable is composed of core, inner insulation layer, semiconductor layer, steel armor, filler, outer insulation layer, etc.; conductor is copper or plated Tin copper, but in conventional cables, copper is mostly used as the conductor. Cables with different uses use different materials, but the cores are copper or aluminum. The specific use of copper, aluminum or tinned copper is related to the price of the market materials and can only be used in special cables. However, how many layers of high-voltage cables do they play? The high-voltage electricity is sealed to three layers, the innermost layer of the first layer is an insulating layer, and the next layer is a conductive layer, among which there are shielded or unshielded cables. The shielded cable has an improved electric field. As a measure of distribution, a conductor wrapped with a conductor outside the conductor is called a shielded wire. The conductor wrapped with a conductor outside the conductor is called a shielded wire, and the wrapped conductor is called a shielding layer, which is generally a braided copper mesh or copper moor (aluminum). Of course, the inside of the cable is a conductor, which conducts electricity as a whole product. The overall cable forms an insulating layer that truly protects the entire cable, and is generally divided into three layers for the correct function without damaging the cable. For more about EV HV cable and Charging cables, Please visit or search: https://www.omgevcable.com |
|
According to the electrical design and development requirements of the electric vehicle charging cable, the charging cable is required to connect the harness to the connector, and the cable with the current and voltage size is designed in accordance with the current and voltage during the development and production process of the cable. Generally divided into AC charging cables and DC charging cables. As a carrier of electric power transmission for electric vehicles and charging piles, it is important for charging cables of first-class quality. Among them, OMG Cable is a domestic manufacturer of charging cables of various standards. OMG is committed to becoming a global supplier of advanced new energy conduction technology, and I believe that there will be better development in the future. Electric Vehicle Combo Charging System: CSS vehicle jacks are designed to accept both AC and DC power connectors. AC fast charging is beneficial when parking for long periods of time in garages or parking lots; DC fast charging is used when parking for short periods in shops, rest stops and dedicated charging stations. Of course, that includes using e.g. a home that installs a three-phase power supply that can reach 11 kW at 16A, while a single-phase power supply requires cables that provide about 48A and so on. Cables, including charging cables and high-voltage cables, are important power equipment, which can transmit signals. There are many kinds of commonly used insulating materials, generally polyvinyl chloride (PVC), polyethylene (PE), cross-linked polyethylene (XLPE), halogen-free low-smoke polyolefin, fluoroplastic, silicon (silicon) rubber, nitrile, ethylene-propylene rubber, nylon, etc. Products stranded through the cable manufacturing process, the thickness of the cable is divided by looking at multi-core or single-core products. Of course, quality is strictly required in the cable production process, and it is an important carrier tool for equipment connection, which is certain. For more EV charging cable information, Please visit or search: https://www.omgevcable.com |
