|
PV + Diesel Hybrid Systems Integrated Lithium Iron Phosphate Energy Storage & Inverter & Charger
Performance characteristics: 1. All-in-one design, high integration and space saving installation; 2. Environmental protection and pollution-free materials, no heavy; 3. Accurately estimate the state of charge of the battery pack, that is, the remaining power of the battery, to ensure that the power of the battery pack is maintained within a reasonable range; 4. Built-in BMS management system with comprehensive protection and monitoring control functions; 5. 5" LCD screen display, easy to operate, can check the temperature, voltage, working status, discharge current, dynamic and static SOC algorithm of a single cell, local display of alarm info, alarm level distinction, accurate positioning of abnormal cells; 6. Main control MCU can be centrally controlled and manage peripheral settings (AC charging module, inverter module, solar charging module) to adjust the charging current and voltage of peripheral devices according to the battery charging curve, making the system more reliable; 7. BMS battery management system, with SOC automatic calibration and high current passive balance function, combined with perfect operation control and management strategy, to achieve accurate and efficient management; 8. EMS energy management system, BMS with solar controller/AC charger, inverter centrally manages charge and discharge, effectively controls the charge and discharge current within the cell usage conditions, protects the cell and extend its service life;
|
|
high voltage 280V 460V 614V Solar energy storage system with BMS LiFePO4 Lithium Battery with BMS System Introduction 1,Long service life, 3000 cycles, service life > 10 years. 2,Including BMS(battery management system) and LCD monitoring. 3,Including battery cabinet, all battery cables are connected well. 4,Safe and reliable. 5,High energy density, strong endurance. 6,5'touch screen LCD integrated communication, convenient for real-time monitoring of data. 7,Safety and environmental protection. 8,High cost performance, excellent quality, longer service life. 9,Perfect protection functions: short circuit, over load, under voltage, over voltage and over heat protection. 10,We can customize 30KWH-1000KWH lithium battery energy storage system.
Applications: 1.Energy Storage --Solar-Wind Power System / City Grid (On/Off) / Community and Family --Oil pumpingsystem /Drilling rigs/ Amusement park system --Solo island power generation / Container energy storage 2.Back-up System and UPS --AI Smart system / Mobile Rescue Vehicle system/ Fuel Cell Energy Storage --Cold Link Vehicle Energy Storage// Medical Instrumnt / Military Equipment --Telcom Base / CATV system / Computer Server Center 3.Other Applications --Security and Electronics --EMS Intelligent Fire Energy Storage --Coal Mines / Emergency Light --RV Motorhome /Boat Marine Yachts / Electric car --LED Backup / Engine Starting Battery,etc. |
|
光伏+柴油机混合发电系统磷酸铁锂电储能&逆变&充电三合一 邦照电气SPVLI系列光伏锂电储能混合系统包含磷酸铁锂电池模组、BMS、光伏控制器、市电充电器，正弦波逆变器、中央控制单元CCU、温度探测器、一体化结构等部分组合而成；此系统中太阳能电池板为电池存储及电力输出用；BMS模块完成动力电池组的电压、电流、温度、SOC、SOH及充放电相关参数检测控制；BMS系统根据电池情况对光伏或市电充电进行控制，保护电池充放电性能，正弦波逆变器实现DC转AC实现直流变换交流，各探测器用以实时监控环境温度从而保障系统的安全性。集中通讯在一个液晶触控屏里面显示系统的数据。 产品优势: 1. 一体化设计，高度集成，节省安装空间。 2. 采用高性能磷酸铁锂电芯，激光焊接，电芯一致性好，设计使用寿命在10年以上。 3. 充电和放电分开控制，充电和放电控制方便可靠。过充时放电口不会断开，过放时充电口也不会断开，系统稳定性好。 4. 主从模式，被动均衡，可对均衡电阻进行管理，可设置均衡启动电压差，并监控均衡电阻温度，更加智能和安全，减少木桶效应对系统储能的影响。 5. BMS采用NXP（美国）汽车级高性能芯片，抗干扰性强，可靠性好，温度范围广。（VX+18969760766） 6. CAN2.0通信接口，具有实时性强、传输距离长、抗电磁干扰能力强等优点。 7. 可通过上位机设置系统参数，如风扇启停温度、充电器最大电流设置、充放电电流校正、SOC校正，具有绝缘漏电检测功能，防止电池漏油和短路。 8. 集成太阳能控制器、交流充电器、BMS通讯控制，更加安全可靠。 9. 电池片温度管理，可根据电池片情况与空调加热器自动控制，使电池片工作在最合适的温度，并可根据需要与消防系统联动 |
